SDIF I/O Option

 

 
The Mykerinos SDIF daughter board is specially designed for multitrack-DSD recording. It offers 8 channels of digital I/O over 8 BNC connectors.

 SPECIFICATIONS

 

  • 8 channels of DSD digital input over 8 unbalanced, 75 Ohm terminated BNC connectors.

  • 8 channels of DSD digital output over 8 unbalanced, 75 Ohm BNC connectors.

  • Original DSD bit rate of 2.82 MHz is transported at 8 times 44.1kHz frequency through each BNC connector.

  • SDIF-2 and SDIF-3 format are fully supported for DSD transport (selected under software control)

  • Compatibility with the HDTDM/XDTDM Bus in order to connect it to other Mykerinos boards. 

    Note: In DSD (1bit / 2.8224 MHz) operation, the maximum supported amount of I/O DSD channels is 1. To have the full range of 8 I/O channels, a second Mykerinos board is necessary to provide enough DSP power.

 

 CONNECTIONS

 

Connection is over two DB-25 connectors (one primary on the daughter card itself, the other on a separate ribbon cables). This option includes  DB-25 to BNC cables.