|
The DUA II is the most cost-effective audio
interface solution for Pyramix users, SOFTIMAGE®|DS users, audio
professionals and OEM’s, designed to support a surround monitoring
system. This rack mount unit can be operated as a stand-alone unit,
using a simple and comprehensive user interface, or remotely
controlled by Pyramix.
|
|
FACE PLATE
|
|
|
|
KEY FEATURES
|
|
The DUA II features a comprehensive list of
features for the broadcast market, CD-R mastering, and audio post-production applications.
- 4 analog line
inputs (24 bit A/D)
- 4 digital
channels on 2 AES-EBU inputs (24 bit)
- 4 analog line
outputs (24 bit D/A)
- 4 digital
channels on 2 AES-EBU outputs (24 bit)
- 2 monitoring
analog line outputs, with headphone output and volume control, for
stereo monitoring of any of the input
or output channel pairs (24 bit D/A).
|
|
TYPICAL APPLICATIONS
|
- Ideal I/O
solution for mixed Analog/Digital requirements,
as encountered in Broadcast production and
Video/Film post-production environments.
- Full 5.1
Surround monitoring system support.
- Up to two
units can be used in parallel for a 16 I/O solution,
with Merging’s high performance audio boards
such as Mykerinos.
- Tested in such
applications as SOFTIMAGE®|DS, Incite
Studio, WaveFrame FrameWorks, etc...
|
|
FEATURES
|
- The signals from the 8 inputs are
also fed to the optical lightpipes in ADAT-compatible format.
This allows a direct connection to ADAT compatible multitrack
devices and other equipment
such as digital consoles. These optical lightpipe connectors
support up to 8 channels of 24
bit digital audio on one single optical fiber with no risk at all
of line hum or any other
electromagnetic interference.
- All audio connections are made using
high-quality balanced XLR type connectors.
- High quality 24 bit A/D and D/A
using the latest generation in converter technology.
- High common mode rejection balanced
input circuitry on all analog input for optimum rejection
of power line hum, RF interference, voltage drops and other
externally-generated noise
commonly encountered with long audio cable runs.
- All analog balanced output circuitry
incorporates the advanced "Twin Servo Drive" output
stage for maximum output signal balance ratio performance, even
under adverse asymmetrical
loads.
- Input and ouput level selection
through DIP switches offers an over 18 dB range to accomodate
all standard studio levels.
- Very low jitter clock with high
incoming reference jitter rejection.
- Clear and easy to use front panel
controls.
- Very comprehensive choice of
Synchronization Sources including ODI, AES/EBU and Wordclock.
- Selectable stereo monitoring of all
8 inputs and outputs.
- Local control from the front panel
(in stand-alone mode).
- Remote control from Pyramix Virtual
Studio Software.
- Rugged internal power supply. This
unit accepts both 110 and 220 voltages for
worldwide use.
- Fully tested for CE compliance for
guaranteed safety and stability.
- Fits into standard 1U high 19"
rack.
|
|
REAR PLATE
|
|
|
|
DOCUMENTATION
|
|
Acrobat Document
Left Click to read
Right Click and select "Save
Target As" to download
File Size 140 KB - August 10, 2000
Acrobat Document
Left Click to read
Right Click and select "Save
Target As" to download
File Size 750 KB - March 23, 2000
|